Mega Build (BP 1500) Part B
PRODUCT NAME: Mega Build (BP 1500) Part B HMIS CODES: H F R P
PRODUCT CODE: 400-BP-PROCk-B 2 1 0 B
SECTION I -- MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: NORTHERN INDUSTRIAL FLOORING, INC.
EMERGENCY PHONE:800/424-9300 DATE PRINTED : 06/01/02
INFORMATION PHONE: 800/348-4621
NAME OF PREPARER: Dave Harmon
SECTION II -- HAZARDOUS INGREDIENTS/SARA III INFORMATION
Reportable Compents CAS # WT.% Vapor Pressure
----------------------------------------------------------------------------------------------------------------------------
Isophorone Diamine
Benzyl Alcohol
Cycloaliphatic Amine Adduct
2855-13-2
100-51-6
Proprietary
<40%
>40%
<20%
SECTION III -- PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING RANGE: 401 F
VAPOR DENSITY: 5.88
SPECIFIC GRAVITY (H2O = 1): .99
SOLUBILITY IN WATER: Slightly Soluble
EVAPORATION RATE: Slower than ether
APPEARANCE AND ODOR: Amber colored liquid, with amoniacal odor.
COATING V.O.C.: 0 lb/gl MATERIAL V.O.C.: 0 lb/gl
SECTION IV -- FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: >200 F METHOD USED: Closed Cup
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: N/A UPPER: N/A
EXTINGUISHING MEDIA: Dry chemical, CO2, foam, water spray or fog.
SPECIAL FIREFIGHTING PROCEDURES
Respiratory equipment should be worn to avoid inhalation of concentrated vapors.
Wear positive pressure, self-contained breathing apparatus and full protective
equipment when fire fighting in confined space. Use water spray to keep fire-exposed containers cool.
UNUSUAL FIRE AND EXPLOSION HAZARDS
May produce hazardous fumes or hazardous decomposition products.
SECTION V -- REACTIVITY DATA
STABILITY: Stable.
CONDITIONS TO AVOID (STABILITY): High temperatures, poor ventilation, corrosive atmospheres, and excessive aging.
INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizers,acids, bases, and epoxy curing agents under uncontrolled conditions.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Phenolics
HAZARDOUS POLYMERIZATION: Will not occur by itself
SECTION VI -- HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
May cause irritation to the respiratory tract.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
EYE CONTACT:
may cause irritation (pain, tearing, redness and swelling of the eyes).
SKIN CONTACT:
may cause skin irritation; drying, cracking, defatting, or flaking of skin.
Prolonged contact may cause redness and swelling of skin which may lead to dermatitis.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Not likely to be absorbed in toxic amounts.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Moderately toxic. Can result in irritation in the digestive tract. Symptoms can
include sore throat, abdominal pain, nausea, vomiting, and diarrhea.
HEALTH HAZARDS (ACUTE AND CHRONIC):
ACUTE: may cause eye, skin, and respiratory irritation.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
Dermititis, nausea, and any breathing problems.
EMERGENCY AND FIRST AID PROCEDURES:
INHALATION EXPOSURE:
Remove to fresh air. If not breathing, give artificial respiration and seek medical assistance.
EYE CONTACT:
Flush with water for at lease 15 minutes. Seek medical assistance.
SKIN CONTACT:
Wash thoroughly with soap and water. Remove any contaminated clothing. If redness or
swelling develops, seek medical assistance.
INGESTION
Do not induce vomiting. Do not give anything by mouth to an unconscious person.
Obtain emergency medical assistance immediately.
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Eliminate all ignition sources, provide good ventilation, contain spill, and soak up in
absorbent material. Prevent runoff from entering drains, sewers, or streams. Use spark
resistant utensils in clean up.
WASTE DISPOSAL METHOD:
Follow federal, state, and local regulations. Do not dump material into drains,
sewers, streams, or the ground. Incineration may be an option.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
Keep away from heat, sparks, and flame. Keep containers closed when not in use.
Use non-sparking utensils when handling this material. Store in well ventilated
area. Do not store with incompatible materials.
OTHER PRECAUTIONS:
This material reacts with water so containers must be tightly closed when not in
use. Also this material reacts with Isocyanates.
SECTION VIII -- CONTROL MEASURES
OTHER PROTECTIVE CLOTHING OR EQUIPMENT:
RESPIRATORY PROTECTION
Not required under normal conditions in a well ventilated work area. A NIOSH
approved respirator is recommended under emergency conditions.
VENTILATION
Use only with adequate ventilation. Ventilate as needed to comply with exposure limit.
Local exhaust ventilation recommended.
PROTECTIVE GLOVES
Use impervious chemical resistant gloves.
EYE PROTECTION
Chemical safety glasses, goggles, and faceshields for eye protection are recommended.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
Use impermeable aprons and protective clothing whenever possible to prevent skin
contact. Eye washes and safety showers should also be provided for use.
WORK/HYGIENIC PRACTICES:
Minimize eye contact, skin contact, and inhalation of vapor whenever possible.
Eye washes and safety showers in the workplace are recommended. Do not eat,
drink, or smoke in the work area.
SECTION XII -- DISCLAIMER
DISCLAIMER:
To the best of our knowledge, the information contained herein is accurate,
obtained from sources that Northern Industrial Flooring, Inc. believes to be accurate.