NIF #23
PRODUCT NAME: NIF #23
PRODUCT CODE: EFR STONE AGREGATE
PRODUCT CODE: EFR STONE AGREGATE
SECTION I -- DESCRIPTION
MANUFACTURER'S NAME: NORTHERN INDUSTRIAL FLOORING, INC.
ADDRESS: 8140 W 350 N ANGOLA, IN 46703
EMERGENCY PHONE: CHEMTREC 800-424-9300 -------------==H M I S==-------------
INFORMATION PHONE: 800-424-8914 = HEALTH : 3*
DATE REVISED: 03-19-96 = FLAMMABILITY : 0
NAME OF PREPARER: HARRY JACKSON = REACTIVITY : 0
= PERSONAL PROTECT : E
-------------------------------------------------------------
(HAZARD RATING: 0=least, 1-slight, 2=moderate, 3=high, 4=extreme, *=chronic)
(E = safety glassed, gloves, and dust respirator)
ADDRESS: 8140 W 350 N ANGOLA, IN 46703
EMERGENCY PHONE: CHEMTREC 800-424-9300 -------------==H M I S==-------------
INFORMATION PHONE: 800-424-8914 = HEALTH : 3*
DATE REVISED: 03-19-96 = FLAMMABILITY : 0
NAME OF PREPARER: HARRY JACKSON = REACTIVITY : 0
= PERSONAL PROTECT : E
-------------------------------------------------------------
(HAZARD RATING: 0=least, 1-slight, 2=moderate, 3=high, 4=extreme, *=chronic)
(E = safety glassed, gloves, and dust respirator)
SECTION II-A HAZARDOUS COMPONENTS
vapor pressure LEL
no. component CAS# SARA (mm Hg @ 20 C) (@ 25 C)
1 QUARTZ 14808-60-7 NO N/A N/A
>>None of the components of this product are recognized as carcinogenic.
no. component CAS# SARA (mm Hg @ 20 C) (@ 25 C)
1 QUARTZ 14808-60-7 NO N/A N/A
>>None of the components of this product are recognized as carcinogenic.
SECTION II-B OCCUPATIONAL EXPOSURE LIMITS
no. (OSHA) PEL/TWA PEL/CEILING PEL/STEL skin
1 .1mg/m3 (DUST) N/E N/E N/E
no. (ACGIH) TLV/TWA TLF/CEILING TLV/STEL skin
1 .1mg/m3 (DUST) N/E N/E N/E
>>The dried film of this product may become a dust nuisance when removed by sanding or grinding. OSHA recommends a PEL/TWA of 15 mg/m3 for total dust and 5 mg/m3 for the respirable fraction. ACGIH recommends a TLV/TWA of 10 mg/m3 for total dust.
>>(SKIN) absorption may contribute to the overall exposure to this material. Take appropriate measures to prevent skin contact.
(N/E = not established)
1 .1mg/m3 (DUST) N/E N/E N/E
no. (ACGIH) TLV/TWA TLF/CEILING TLV/STEL skin
1 .1mg/m3 (DUST) N/E N/E N/E
>>The dried film of this product may become a dust nuisance when removed by sanding or grinding. OSHA recommends a PEL/TWA of 15 mg/m3 for total dust and 5 mg/m3 for the respirable fraction. ACGIH recommends a TLV/TWA of 10 mg/m3 for total dust.
>>(SKIN) absorption may contribute to the overall exposure to this material. Take appropriate measures to prevent skin contact.
(N/E = not established)
SECTION III PHYSICAL DATA
boiling point : not established % volatile by volume : not applicable
evaporation rate : <1 (ether = 1) %volatile by weight : not applicable
vapor density : >1 (air = 1) weight by gallon : 22.04 +/- .2
evaporation rate : <1 (ether = 1) %volatile by weight : not applicable
vapor density : >1 (air = 1) weight by gallon : 22.04 +/- .2
SECTION IV HEALTH INFORMATION
EYE CONTACT
ANY FOREIGN MATERIAL GOTTEN INTO THE EYE MAY CAUSE IRRITATION.
SKIN CONTACT
EXPOSURE MAY PRODUCE SKIN IRRITATION
INHALATION
EXPOSURE MAY PRODUCE IRRITATION TO THE NOSE, THROAT, RESPIRATORY TRACT, AND OTHER MUCOUS MEMBRANES. BASED ON THE PRESENCE OF COMPONENT 1 CHRONIC INHALATION OF SILICA DUST MAY CAUSE "SILICOSIS", A DISABLING PULMONARY FIBROSIS.
ANY FOREIGN MATERIAL GOTTEN INTO THE EYE MAY CAUSE IRRITATION.
SKIN CONTACT
EXPOSURE MAY PRODUCE SKIN IRRITATION
INHALATION
EXPOSURE MAY PRODUCE IRRITATION TO THE NOSE, THROAT, RESPIRATORY TRACT, AND OTHER MUCOUS MEMBRANES. BASED ON THE PRESENCE OF COMPONENT 1 CHRONIC INHALATION OF SILICA DUST MAY CAUSE "SILICOSIS", A DISABLING PULMONARY FIBROSIS.